AUTONET TV

Your Biggest Fan (Radiator Fan Problems)

Your vehicle's engine makes a lot of heat when it's powering you down the road, so it needs a way to get rid of that energy.  That's why your vehicle has a cooling system, complete with a radiator and one or two radiator fans, also called cooling fans.  Those fans make sure air keeps moving across the radiator so that the heat stored in the coolant can be dissipated outside when the vehicle is stopped or not traveling fast.

Radiator fans can develop problems and can stop working properly or stop working altogether.  Some signs to look for? If you're driving slowly and idling and you see your temperature gauge moving toward the red or hot zone, that could spell trouble.  Another thing you may notice when a radiator fan is failing is that there may be a loud noise coming from the engine compartment.

There are two types of radiator fans.  One is mechanically connected to the engine and uses the engine's rotational energy to turn it.  The other is an electric fan and is the type used in most newer vehicles.  In the electrical type, one of the components, such as a relay or fuse, may fail, causing the fan to stop turning.  In the mechanical type, since it's driven by a pulley/belt mechanism, one of those components may break or stop working properly.  A clutch can wear out or a belt may slip or break. 

When your cooling fan isn't working properly, it may cause your engine to overheat which could lead to expensive damage. That's why it's important to make sure you visit your service facility if you notice any of these symptoms.  A technician is trained to diagnose the problem and make sure your radiator fan is doing its job.  When it comes to your vehicle, your radiator fan really is your biggest fan.

Brake World
1213 N State Rd 7
Royal Palm Beach, FL 33411
561-798-3949
http://www.westpalmbeachautorepairs.net

Automotive Tips from Brake World: Where Should New Tires Be Placed

When Royal Palm Beach drivers need to replace tires, they need to know how many they should get and on which axle they should be placed. Replacing a damaged tire may leave you with three others with significant wear, which could affect your traction control, stability control and anti-lock brake systems.

If you can’t afford to replace all four tires at once, you should at least replace two on the same axle. New tires should always be put on the rear axle for stability in slippery conditions. Your friendly and professional Brake World tire professional can help you know when your worn tires should be replaced, if you can have a damaged tire repaired as well as selecting the right tires for your needs.

Give us a call.

Brake World
1213 N State Rd 7
Royal Palm Beach, FL 33411
561-798-3949
http://www.westpalmbeachautorepairs.net

Read a Good Tire Lately? (Tire Wear)

There's lots of good information to read in books and online.  You might not know that you can also "read" your tires and learn a lot about what shape they're in and if they are in need of attention. It's important to know how your tires are doing because a tire failure can be very dangerous to you, your passengers and others on the road near you.

You read your tire by looking at the surface that rides on the road, where the tread is.  Check out the outer and inner edges.  If you notice there's more wear on the inner or outer edge than on the rest of the tread, your vehicle could be out of alignment.  Wear on an inner or outer edge could mean your wheels are leaning too much to one side.  When you see this, visit our service center soon to have the alignment checked.

What about if both edges are worn? That could be a sign that you don't have enough air in that tire.  In an underinflated tire, the middle is not contacting the road surface as much as the edges, so the edges wear down first.  It could also mean that you're taking corners too aggressively or your tires haven't been rotated on a regular schedule.

Another thing you might see on your tires' tread area is wear in the center of the tire.  That means you likely have too much air in that tire.  Too much air makes your tire contact the road in the middle more than on the edges so the middle wears down prematurely. 

You might also see some smooth spots on the tread in irregular spots. This is called cupping. This is sometimes caused by suspension problems. A technician can examine your suspension to see if it is up to the manufacturer's specifications.

Finally, you may spot tires that are worn unevenly in a pattern that goes diagonal to the tread pattern.  This could mean your tires are out of balance, something our service center can check. They might also check alignment at the same time.

Your tires are the only part of your vehicle that contacts the road surface.  That means your acceleration, traction, steering and braking are all dependent on your tires being healthy. Maintain your tires by having one of our trained technicians read the clues and making sure they're always in roadworthy shape. 

Brake World
1213 N State Rd 7
Royal Palm Beach, FL 33411
561-798-3949
http://www.westpalmbeachautorepairs.net

Clean Machine (Fuel and Air Induction Cleaning)

As your vehicle ages, its performance isn’t quite what it used to be, but many of us never notice the change because it’s gradual.  So here are a few questions to ask yourself.  Does your vehicle feel like it doesn’t have the pep that it used to? Have you noticed your fuel economy isn’t quite as good as it once was? Does it idle roughly or is it hard to start?  Do you hear the engine knocking? Has it recently failed an emissions test?

All of those can be signs that your fuel and air induction systems are dirty and need cleaning.  Your fuel system takes gasoline from the tank to the engine’s combustion chambers where fuel injectors spray fuel that mixes with air and is ignited by spark plugs.  Black carbon deposits eventually can build up, obstructing fuel flow and diminishing your engine’s performance and fuel efficiency.

The air induction system is what allows air to go into the engine’s combustion chamber.  Getting the proper air flow is necessary for you to quickly start your vehicle, accelerate, and perform the way it should and idle smoothly when you’re standing still.  Like the fuel system, your air induction system can get blocked up with deposits and other contaminants.

A professional fuel and air induction cleaning can help restore your performance and fuel economy, especially when you are experiencing problems.  A technician will use specialized chemicals that can remove the carbon buildup.  In extreme cases, they will remove the fuel injectors and clean them with specialized tools.  

After cleaning, you may notice how much more pep your vehicle has and how smoothly it runs.  Keep your fuel and air induction systems clean and enjoy your vehicle’s performance improvements.

Brake World
1213 N State Rd 7
Royal Palm Beach, FL 33411
561-798-3949
http://www.westpalmbeachautorepairs.net

No Fueling! (Fuel Filler Location)

If you've ever gotten in an unfamiliar vehicle, maybe a rental car, you may have pulled up to the gas pump and wondered, "Which side is the fuel filler on?" Here's a tip for you.  There is usually a little arrow on the instrument panel near the fuel gauge that points to the side where the fuel filler is. 

But why are the fuel fillers not all on the same side, anyway? There are lots of reasons.  At one time, many manufacturers tried putting them in an easy-to-reach spot: in the center of the vehicle's rear end.  Some even hid them behind a hinged license plate door.  Cool place, but it turned out not to be a good idea.  When a vehicle with a fuel filler in the rear was hit by another vehicle from behind, it was much more prone to catch fire and explode.

Safety regulations now dictate that the fuel filler doors be placed within crumple zones and away from where they can drip fuel on hot exhaust pipes or near electrical connections.  But why do manufacturers put them on either side?

Some say it should be on the side away from the road.  That way if you run out of gas and have to add a little from a gas can as your standing at the side of the road, you'll be a little farther away from passing traffic.  So some companies from North America and many European firms with left-hand drive put their fillers on the right side.

Some manufacturers think convenience for the driver is paramount, so they put their fuel fillers on the driver's side.  If you have a vehicle with a cable release for the fuel door inside the cabin, it's usually on the same side as the steering wheel.  As you can see, there's no standardization.

Fuel doors need regular maintenance such as lubrication, and your gas cap (if your vehicle has one) should seal properly.  Have your service facility inspect those regularly. Wherever your fuel filler is, it's obviously important that you can get at it easily because you have to fuel up sometime. Otherwise, you're not going to go too far!

Brake World
1213 N State Rd 7
Royal Palm Beach, FL 33411
561-798-3949
http://www.westpalmbeachautorepairs.net